WELCOME TO Hongkong NKF Machinery Co.,Limited. English | Spanish

about Hub Bearings

about Hub Bearings
Author :Admin | Publish Date:2012-04-05 10:01:27

The “hub bearings” are located between the brake rotors and the axle. They, in most cases, are what your lug nuts bolt onto.


Inside, They contain a bearing Some cars only have a bearing, as scene at the above link, for each wheel. There is no hub.


The hub unit is basically a unit that can be installed into the wheel to make it turn easier and greatly reduce friction between the frame and the wheel and axle.

 

Some cars only have a bearing, as scene at the above link, for each wheel. There is no hub.
The hub unit is basically a unit that can be installed into the wheel to make it turn easier and greatly reduce friction between the frame and the wheel and axle.

 

A hub bearing on a car servers two primary purposes, including allowing the hub and attached components to rotate freely, and also to keep the wheel tire and rotating mass attached to the car. Learn about the two types of hub bearings, including unit bearings and wheel bearings, with help from an auto mechanic in this free video on auto parts.

 

All vehicles have wheel bearings. And sooner or later, those bearings will have to be replaced. We provide premium Hub bearing units that are manufactured in the USA from only the highest quality products. All of our wheel bearings and hub assemblies are tested before they are shipped to you so we can ensure the highest quality possible.

 

Wheel bearings hold your wheels on and allow them to spin properly. They are an essential automotive component that must be kept in working order. Most wheel bearings are sealed at the factory (commonly referred to as hub bearings or hub assemblies) and do not require replacement until, perhaps, 150,000 miles. However, there are many cars on the road whose wheel bearings do require regular service and replacement.

 

Over time, the grease in your wheel bearings can breakdown and become less effective. Also grease can escape through the bearing seals until there is not enough left to lubricate the bearings. Without proper lubrication, the wheel bearings could overheat. When that happens, you usually experience a wobbly wheel or a low growl or hum coming from any of your wheels. In most cases, the wheel bearing noise will vary with steering. E noise may come and go depending on if the wheel is being turned. If this is ignored for long enough, it can cause your wheel to fall off, but this only happens in extreme conditions. You should replace your Wheel Bearing or Hub Bearings as soon as you can when you experience any of these symptoms.

 

Some vehicles require Wheel Bearings and some, Wheel Hub Bearings (Hub Assemblies). We provide both to our customers, depending on their needs. Hub Assemblies and Wheel Hub Bearings are an entire, enclosed hub unit containing one or two bearings that can vary in type. These units are fairly easily replaced, and weigh from 5 to 20 lbs. Other vehicles require a press in bearing. These press in bearings weigh from 1 to 5 lbs. When replacing the bearings in these automobiles, you need a Hydraulic Press. Still others have an open, not sealed hub. In these hubs, you can easily take the bad bearings (and sometimes races) and replace them with new bearings. Most of these serviceable hubs exist in older vehicles, and in some newer vehicles in the rear.. In nearly all cases, when these bearings go bad, only the bearings need to be replaced, not the entire hub. Replacement of these wheel bearings requires replacement of the old and worn seals. When you are in need of these types of bearings, please use the form above.

 

Replacing in Pairs. Many people replace their Wheel Bearings, Hub Bearings, and many other components of their vehicle in pairs. This is to reduce shipping fees and the overall time it take to replace two of the same parts at different times. In most cases, when one wheel bearing or hub unit starts to fail, the other is not usually too far behind. The other bearing may last a few hundred or thousand miles more than the failing bearing. There is really no way to tell. We suggest you replace your wheel bearings in pairs to save both time and money.


 

Contact Us

TEL:00852-54978621
FAX:00852-54979628
Email:sales@dbearings.com
Add:UNIT 04,7/F BRIGHT WAY TOWER,NO 33 MONG KOK ROAD,KL
WhatsApp:8618112377009

timken information lists

Copyright © 2014 Hongkong NKF Machinery Co.,Limited. All rights reserved. TEL:00852-54978621 FAX:00852-54979628 Email:sales@dbearings.com